test autoklimy

Odpovědět

Autor tématu
dako5
legenda hvězd
Příspěvky: 3637
Registrován: čtv 31.07.2008, 19:11
Auto: Prostě pár mercedesů na ježdění i na díly
Bydliště: Jaroměřice nad Rokytnou
Věk: 55

test autoklimy

Příspěvek od dako5 »

na youtube je to asi od holanďanů,ale co z toho jde zjistit?Tohle jsou kódy závad či co? " onclick="window.open(this.href);return false; a tohle? " onclick="window.open(this.href);return false;

sonypolicka
Administrátor
Příspěvky: 1160
Registrován: pon 28.07.2008, 9:11
Auto: W124 300E-24 Sportline a W140 300SE + P306 chrocht
Bydliště: Polička-Berlín, Vinice
Věk: 48
Kontaktovat uživatele:

Re: test autoklimy

Příspěvek od sonypolicka »

já tam vidím čtení údajů snímačů.

Dokec
hvězdička
Příspěvky: 84
Registrován: čtv 06.01.2011, 14:44
Auto: MB 290 TD
Bydliště: Brno
Věk: 58

Re: test autoklimy

Příspěvek od Dokec »

Taky by mě zajímalo, co tam na těch videích je. Rozumíte někdo tomu,co říkají?

malcUm
hvězdička
Příspěvky: 188
Registrován: pát 01.08.2008, 10:21
Auto: ex W140 S500L, r129, e38 740iL, 300c hemi
Bydliště: Slaný
Věk: 39
Kontaktovat uživatele:

Re: test autoklimy

Příspěvek od malcUm »

Pokud jde o to cteni zavad na klime, tak tady je popis v AJ

Preparations for DTC readout:

Ignition ON
Temperature selector left "HI", right "LO".
Within 20 seconds, press REST and EC simultaneously for more than 5 seconds
The led in the RECIRCULATE button flashes and the display shows "di R"
Press AUTO repeatedly until all DTC's (refer to DTC table) are displayed. Record each DTC as it is displayed.
Each malfunction (short circuit, open circuit, etc.) has a specific DTC assigned to it.
The letter "E" (Error) is displayed in the left side of the display and the DTC is displayed in the right side of the display. By pressing the right AUTO button, the next DTC stored in memory will be displayed.

To erase: Only possible after all DTC's are read out. Simultaneously press both AUTO > 2 secs. "d" will be displayed in the left side of the display window and "FF" on the right side.
To cancel erase: By pressing AUTO the current faults will appear again.

Set temperature selector to normal setting.
Turn ignition OFF to end test.

DCT table:

B1226 - In-car temperature sensor (B10/4)
B1227 - Outside temperature indicator temperature sensor (B14)
B1228 - Heater core temperature (B10/1)
B1229 - Heater core temperature (B10/1)
B1230 - Evaporator temperature sensor (B10/6)
B1231 - ECT sensor (B11/4)
B1232 - Refrigerant pressure sensor (B12)
B1233 - Refrigerant temperature sensor (B12/1)
B1234 - Sun sensor (B32)
B1235 - Emissions sensor (B31)
B1241 - Refrigerant fill
B1416 - Coolant circulation pump (M13)
B1417 - Duovalve (Y21y1), left
B1418 - Duovalve (Y21y2), right
B1419 - Electromagnetic clutch (A9k1)
B1420 - Idle speed increase
B1421 - Pulse module (N65)
B1422 - Series interface (K1) connection to instrument cluster (A1)
B1423 - Switchover valve block (Y11)
B1424 - Activated charcoal filter actuator (A32m2) open
B1425 - Activated charcoal filter actuator (A32m2) closed
B1432 - Non-USA DTC
B1459 - Series interface (K2) connection to instrument cluster (A1)
B1462 - Wide open throttle (WOT) position signal: diesel engines
Odpovědět